Leica RX1250 SmartRover Instructions Manual

RX1250 Real-Time SmartNet Corrections Via a Siemens MC75
System 1200 Guide - RX1250 Real-Time SmartNet
This guide describes how to configure your RX1250 SmartRover.
With a Siemens MC75 on the clip using a GPRS Data plan for
connecting to SmartNet
Topics

Introduction

Leica UK Technical Support Group
Corrections Via a Siemens MC75

• Establish a Connection between the RX1250 and the Siemens Module

• Establish a Connection between the RX1250 and SmartNet via Mobile
Phone Internet Connection
Many of the mobile phone providers today offer GPRS enabled phones
with Bluetooth capability. As a result, these mobile phones may be utilised
to log onto the Internet and receive correction data from the SmartNet
reference network.
Notice: You will need to have a GSM mobile phone with a GPRS Data
Plan from a UK provider, such as Vodafone, Orange, T-Mobile etc...