1. Receive a PAL Colour Bar pattern.
2. Connect an oscilloscope to TPLG1 on LG-Board.
3. Adjust Sub Color so that the waveform A is 120 ± 2V.
9.7. Blue Focus / Gamma Adjustment
Preparation
Picture Menu : Dynamic
WB-B-G-ST1 : 0
C Temp : Standard
B-Limit : 255
AI : ON
P-NR : ON
Scan Mode : 100Hz (PAL)
Adjustment
1. Set the White Balance Meter on Screen center.
2. Receive a Window pattern.
3. Set the Sub Contrast and High-B to Max.
4. It pushes and it makes a [HELP] key the project only of BLUE.
5. Adjust Blue Focus VR so that Y is 4.0 ± cd/m
2
41