Convergence Adjustment 10 - Panasonic TC-51P15 Series Operating Instructions Manual

Convergence Adjustment
Convergence Adjustment mode
Horizontal centre marker
1
Push the "Main Menu" button.
MAIN MENU
Select the "FEATURES" menu
by using the Position Left "<"
N
or Right ">" button.
Push the Position Up "∧" or
Down "∨" button to enter
FEATURES function.
2
Select the "CONVERGENCE"
menu by using the Position Up
N
"∧" or Down "∨" button.
3
Push the Position Left "<" or
R i g h t " > " b u t t o n t o e n t e r
N
CONVERGENCE ADJUSTMENT
mode.
10
Prior to adjustment, tune the broadcast signal to the video input
signal and operate the set for more than 60 minutes. If the loca-
tion or direction of the set is changed or moved, the display may
be out of alignment.
If necessary, carry out the following procedures once with PAL
signal and again with the NTSC signal.
Vertical centre marker