Table of Contents
Advertisement
6. Push [ 0 ] button so that set the Data of Coarse/Fine Convergence
to Zero Correction.
7. Push [ HELP ] button so that projecting Green only.
8.3.2. H-Pos and H-Amp Adjustment
1. Adjust Monoscope pattern for center of the screen by H-Pos
control.
2. Adjust Horizontal amplitude for 2.5 ± 0.1 division of a scale by H-
Amp control.
8.3.3. V-Amp, V-Linear and V-Pos Adjustment
1. Adjust Vertical amplitude for 2.5 ± 0.1 division of a scale by V-
Amp control.
2. Confirm Vertical Linear as to the balance of circle, if need adjust V-
Linear control.
33
Advertisement
Table of Contents
