Table of Contents
Advertisement
Convergence Adjustment
Convergence Adjustment mode
Vertical centre marker
Horizontal centre marker
1
MENU
Press to select the "CONVERGENCE".
2
Press to access to the "CONVERGENCE" menu.
Press to select the "CONVERGENCE 1" or the "CONVERGENCE 2".
3
Press to access to the function.
Convergence 1 Adjustment for RED, BLUE and GREEN
RED
Press to align the horizontal red line with the horizontal blue line.
(Becomes a white line)
Press to align the vertical red line with the vertical blue line.
(Becomes a white line)
Press "N" button to adjust the blue mode.
(Stores RED)
BLUE
Press to align the horizontal blue line with the horizontal yellow line.
(Becomes a white line)
Press to align the vertical blue line with the vertical yellow line.
(Becomes a white line)
Press "N" button to adjust the green mode.
(Stores BLUE)
Only when you cannot adjust with RED and BLUE proceed to the following GREEN adjustment.
GREEN
Press to align the horizontal green line with the vertical centre maker.
Press to align the vertical green line with the horizontal centre maker.
Press "N" button to adjust the red mode. (Stores GREEN)
TV/AV
Press at any time to return to the normal viewing.
14
Press to display the MAIN MENU,and then to the SETUP menu.
Repeat above adjustment for each position.
Prior to adjustment, tune the broadcast signal to the video input signal
and operate the set for more than 60 minutes. If the location or direction
of the set is changed or moved, the display may be out of alignment. If
necessary, carry out the following procedures once with PAL signal and
again with the NTSC signal.
Example:
CONVERGENCE 1
is selected.
SETUP MENU
3D-COMB
ON
PICTURE SHIFT
ON
TUNING MENU
OWNER ID
CONVERGENCE
ACCESS
CONVERGENCE 1
ACCESS
CONVERGENCE 2
CONVERGENCE
RED
ADJUST
ADJUST
EXIT
N-BLUE
CONVERGENCE
BLUE
ADJUST
ADJUST
EXIT
N-GREEN
Vertical centre marker
CONVERGENCE
GREEN
ADJUST
ADJUST
EXIT
N-RED
Horizontal centre marker
- Quick Links:
- Specifications
Hide quick links:
Advertisement
Table of Contents
