Table of Contents
Advertisement
16. Adjust the LINE, EASY and POINT DATA again viewing all over
the screen.
If need the adjustment at the around of screen, select the
"ORIGINAL" and adjust it.
17. To store the data after the Green Convergence Adjustment has
been completed, push the "MAIN MENU" button and then push
the "N" button (pushing the "N" button will store the data in the E
PROM).
18. Remove the Convergence Adjustment Sheet from the screen.
10.4.2. Red Convergence Adjustment
1. Push the "MUTE" button twice and change to the Red Adjustment
of Yellow Colour.
2. Repeat the same steps described for the Green Conv.Adj. in 1~16
to perform the Red Convergence Adjustment.
3. To store the data after the Red Convergence Adjustment has been
completed, push the "MAIN MENU" button and then the "N"
button.
56
2
Advertisement
Table of Contents
