Water Spray Flow Setting; After Using The Machine; Pushing/Towing The Machine - Viper ROS1300 Instructions For Use Manual

Table of Contents

Advertisement

INSTRUCTION FOR USE

WATER SPRAY FLOW SETTING

Set up the machine as follows:
1.
Press "vacuum button" (A, Figure 15) and "pump button"
(B, Figure 15) at the same time.
2.
Insert ignition key (C, Figure 15) and turn it to "I".
3.
Several seconds later the system enters user setting mode
(Figure 15).
4.
Release both "vacuum button" (A, Figure 15) and "pump
button" (B, Figure 15).
5.
Press "Turn Left button" (E, Figure 15) to select the Item
4 "4Water Spray Spd" (F, Figure 15).
6.
Press "vacuum button" (A, Figure 15) or "pump button"
(B, Figure 15) to select water spray speed value (50%,
60%, 70% ...) (G, Figure 15).
7.
Press "headlight button" (D, Figure 15), about 1 second later the screen displays "Update OK", indicating that water spray flow
is set up, then restart the machine. (C, Figure 7).

AFTER USING THE MACHINE

After operation, before leaving the machine, perform the following
procedures.
8.
Press one-button start button (C, Figure 16) to turn off all functions
(vacuum, main/side brooms and pump), and then main broom and side
brooms will be lifted.
9.
Press filter shaker button to turn on the filter shaker (B, Figure 16)
10.
Empty the hopper (D, Figure 13) (see the procedures in the previous
paragraph).
11.
Turn the ignition key (A, Figure 16) to "O" and remove it.
12.
Engage the parking brake.
13.
If necessary, charge the batteries (see the procedures in Maintenance
chapter).

PUSHING/TOWING THE MACHINE

To push/tow the machine when it is turned off, perform the following procedures:
1.
Open the cover (A, Figure 17).
2.
Pull the drive motor handle (B, Figure 17) outwards.
3.
Insert the screwdriver (C, Figure 17) to the slot (D, Figure 17). Turn
back the cover, then the machine can be pushed or towed.
4.
When the machine is moved to the destination, take out the
screwdriver (C, Figure 17), then the machine can work normally.
E
D
C
Figure 15
A
B
C
D
19
ENGLISH
Access to select water spray flow mode
Panel Setting
A
Cust
B
4water spray Spd
Value : 70%
F
G
C
B
A
Figure 16
Figure 17

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

50000605

Table of Contents