Working Mode Description - Viper ROS1300 Instructions For Use Manual

INSTRUCTION FOR USE

WORKING MODE DESCRIPTION

HOW TO OPERATE
Standby mode
– Key (56) on
– Seat safety switch (23) on
– One-button start (53) off
One-button start mode
– Key (56) on
– Seat safety switch (23) on
– One-button start (53) on
– Key (56) on
– One-button start (53) on
– Seat safety switch (23) on
– Accelerator pedal (32) pressed
Separate running mode
– Key (56) on
– Seat safety switch (23) on
– One-button start (53) off
– Vacuum button (49) / pump
button (50) / side broom button
(51) / filter shaker button (52) on
– Accelerator pedal (32) pressed
Reverse mode
– Key (56) on
– Seat safety switch (23) on
– Forward-reverse button (54) on
DISPLAY
GEL
OFF.
GEL
9
DESCRIPTION
1. The point in the hour meter does
not flash.
2. LCD only displays battery type,
battery level and runtime.
3. All pump, vacuum motor, filter
shaker, main and side brooms
functions are off. (Vacuum motor
will be off in several seconds if it
is on.)
1. The point in the hour meter does
not flash.
2. The tap water drop icon does not
display.
3. The fan icon does not rotate.
4. Filter
"OFF".
5. Main and side broom arrow icon
does not rotate.
1. The point in the hour meter
flashes.
0000.H 2. The tap water drop icon does not
display.
3. The fan icon rotates.
4. Filter
"OFF".
5. Main and side broom arrow icon
rotates.
1. The point in the hour meter
flashes.
2. The tap water drop icon flashes.
0000.H
3. The fan icon rotates. (If filter
shaker is on, vacuum motor will
be off.)
4. Side broom arrow icon rotates.
Horn sounds for reverse warning
ENGLISH
shaker icon displays
shaker icon displays