NOTE:
Before working inside your tablet, read the safety information that shipped with your tablet and follow the steps in
Before working inside your
For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1. Remove the
back
cover.
2. Remove the battery.
3. Remove the
solid-state
drive.
4. Remove the
wireless
card.
5. Remove the
tablet
bezel.
6. Remove the
docking connector
7. Remove the
coin-cell
battery.
8. Remove the speakers.
9. Remove the
I/O
board.
10. Remove the
front
camera.
11. Remove the
back
camera.
12. Remove the
system
board.
Procedure
After performing all the prerequisites, we are left with the display assembly.
1. display assembly
Removing the display assembly
tablet. After working inside your tablet, follow the instructions in
board.
After working inside your
Removing the display assembly
27
tablet.
43