NOTE:
Before working inside your tablet, read the safety information that shipped with your tablet and follow the steps in
Before working inside your
For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1. Align and place the front camera on the display assembly.
2. Slide the camera cable into the connector on the system board and close the latch.
3. Adhere the tape that secures the front camera to the display assembly.
Post-requisites
1. Replace the
tablet
bezel.
2. Replace the battery.
3. Replace the
back
cover.
34
Replacing the front camera
Replacing the front camera
tablet. After working inside your tablet, follow the instructions in
22
After working inside your
tablet.