Table of Contents
Advertisement
NOTE:
Before working inside your tablet, read the safety information that shipped with your tablet and follow the steps in
Before working inside your
For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1. Align and place the back camera on the display assembly.
2. Slide the camera cable into the connector on the system board and close the latch to secure the cable.
Post-requisites
1. Replace the
tablet
bezel.
2. Replace the battery.
3. Replace the
back
cover.
Replacing the back camera
tablet. After working inside your tablet, follow the instructions in
After working inside your
Replacing the back camera
24
tablet.
37
Advertisement
Table of Contents
