Table of Contents
Advertisement
NOTE:
Before working inside your tablet, read the safety information that shipped with your tablet and follow the steps in
Before working inside your
For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1. Align the screw holes on the battery with the screw holes on the display assembly.
2. Replace the screws that secure the battery to the display assembly.
3. Connect the battery cable to the system board.
Post-requisites
Replace the
back
cover.
14
Replacing the battery
tablet. After working inside your tablet, follow the instructions in
Replacing the battery
After working inside your
tablet.
6
Advertisement
Table of Contents
