Responsibility And Liability; Manufacturer; Installer; User - HYDRALOOP H150 Installation Manual

1.3 Responsibility and Liability

1.3.1

Manufacturer

Hydraloop warrants the proper working of the system according to its general sales conditions.
As a manufacturer, Hydraloop is not liable in the following cases:
- Failure to follow the instructions for installation and maintenance of the Hydraloop.
- Failure to follow the instructions for use of the device.
- Inadequate or insufficient maintenance of the device
1.3.2

Installer

The installer is responsible for the installation and initial commissioning of the Hydraloop device.
- The Hydraloop device should always be installed according the local legislation and standards.
- Perform initial commissioning and necessary checks.
- Explain the installation to the user.
- Hand over all manuals to the user
1.3.3

User

To ensure optimal functioning of the Hydraloop device, please observe the following:
- Read and observe the instruction manuals of the Hydraloop device.
- Request the assistance of a qualified installer for installation, commissioning, service and
maintenance.
- Ask the installer for an explanation of the installation.
HL-20210202 Hydraloop Installation Manual
5