Advertisement
Safety Considerations
Read the information below before using this instrument.
This product is a Safety Class 1 instrument, which means it has a protective earth
terminal. That terminal must be connected to earth ground through a power
source equipped with a ground receptacle. Before installation or operation, check
the ac source and review this guide for safety warnings and instructions. Safety
warnings for specific procedures are located at appropriate places in the guide.
The following general safety precautions must be observed during all phases of
operation, service, and repair of this instrument. Failure to comply with these
precautions or with specific warnings elsewhere in this manual violates safety
standards for design, manufacture, and intended use of the instrument. Keysight
Technologies assumes no liability for the customer's failure to comply with these
requirements.
GENERAL
This product is a Safety Class 1 instrument (provided with a protective earth
terminal). The protective features of this product may be impaired if it is used in a
manner not specified in the operation instructions.
Any LEDs used in this product are Class 1 LEDs as per IEC 60825-1.
This ISM device complies with Canadian ICES/NMB-001. Cet appareil ISM est
conforme à la norme NMB-001 du Canada.
LIMITATION OF WARRANTY
The foregoing warranty shall not apply to defects resulting from improper or
inadequate maintenance by the Customer, Customer-supplied software or
interfacing, unauthorized modification or misuse, operation outside of the
environmental specifications for the product, or improper site preparation and
maintenance. NO OTHER WARRANTY IS EXPRESSED OR IMPLIED. KEYSIGHT
TECHNOLOGIES SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Keysight Models 6811C, 6812C, and 6813C Quick Start Guide
5
Advertisement
