Advertisement
Action, key press, or d isplay Resul t
Program a protection
function
1 Press
2 Enter the respective
3 Press [Enter].
4 Press ▲ or ▼ of the
5 Press ▲ or ▼ of the Entry
6 Press [Enter].
Access ac source information
1 Press
2 Press ▲ or ▼ of the
View LAN information
1 Press
2 Press ▲ or ▼ of the
Reset LAN
1 Press
2 Press ▲ or ▼ of the Entry
3 Press [Enter].
40
then
.
current using the keypad
of the Entry key group.
Function key group until
the display shows
CURR:PROT.
key group until the display
shows CURR:PROT ON.
then
.
Function key group to
access the ac source basic
information.
then
.
Function key group to
access the LAN
information.
then
.
key group until the display
shows CONFIRM? YES.
Keysight Models 6811C, 6812C, and 6813C Quick Start Guide
Clears all previously set protection functions and then set the current
protection, which disables the output when an overcurrent condition is
detected. The OCP annunciator will light when this command is
programmed.
Displays ac source basic information such as model, option, serial
number, firmware revision, media access control (MAC) address, USB
vendor identification (VID), and USB product identification (PID).
Displays LAN information such as LAN status, DHCP, auto DNS, MDNS,
IP, subnet, gateway, DNS l, DNS 2, hostname, and domain name.
Resets the LAN configuration to factory default conditions.
0 V
overcurrent detected
Advertisement
