Keysight Technologies 6811C Quick Start Manual page 30

Function
key press
Use ▲ or ▼ to
navigate between
the Trigger Control
function
commands.
Use ▲ or ▼ to
navigate between
the Pulse function
commands.
30
Function command on
the front panel d isplay
ABORT
SYNC:SOUR PHASE | IMM
SYNC:PHASE <value>
-
WIDTH <value>
COUNT <value>
DCYCLE <value>
PER <value>
HOLD WIDTH | DCYCLE
Keysight Models 6811C, 6812C, and 6813C Quick Start Guide
Entry key press
Press [Enter] to execute.
Use ▲ or ▼ to navigate between
PHASE | IMM. Press [Enter] to
save.
Use keypad to key in an exact
value, alternatively use ▲ to
increment or ▼ to decrement.
Press [Enter] to save.
-
Use keypad to key in an exact
value, alternatively use ▲ to
increment or ▼ to decrement.
Press [Enter] to save.
Use keypad to key in an exact
value, alternatively use ▲ to
increment or ▼ to decrement.
Press [Enter] to save.
Use keypad to key in an exact
value, alternatively use ▲ to
increment or ▼ to decrement.
Press [Enter] to save.
Use keypad to key in an exact
value, alternatively use ▲ to
increment or ▼ to decrement.
Press [Enter] to save.
Use ▲ or ▼ to navigate between
WIDTH | DCYCLE. Press [Enter] to
save.
Description
Abort all trigger sequences.
Select synchronous trigger
source.
Set synchronous phase reference.
Generate an immediate trigger.
Set the pulse width.
Set the number of output pulses.
Set the pulse duty cycle.
Set the pulse period count.
Set parameter that is held
constant.