Program an output pulse
Key press and d isplay
VOLT:M PULSE
VOLT 120
VOLT:T 90
WIDTH .01
PER .03
COUNT 2
INIT:IMMED
46
Resul t
Pulse transients transition to a new output level upon receipt of a trigger
and return to the original level after a specified time, repeating this
action by the number of times specified by the count. When these
commands are sent, two output pulses step the voltage amplitude from
its previous setting to 90 V rms upon receipt of a trigger. At the end of
the specified period (multiplied by the count), the voltage returns to its
original level.
VOLT level
TRIG level
Trigger
Keysight Models 6811C, 6812C, and 6813C Quick Start Guide
Width
Period
Pulse Count