Advertisement
Function
key press
SUBNET CONF: <
GATEWAY CONF: <
DNS 1 CONF: <
Use ▲ or ▼ to
navigate between
the LAN Menu
DNS 2 CONF: <
function
commands.
Use ▲ or ▼ to
TRIG:SOUR BUS | IMM | TTLT | EXT
navigate between
the Trigger Control
function
commands.
Keysight Models 6811C, 6812C, and 6813C Quick Start Guide
Function command on
the front panel d isplay
><value>
><value>
><value>
><value>
UPDATE? YES | NO
-
CONFIRM? YES | NO
INIT:IMMED
INIT:CONT ON | OFF
DELAY <value>
Entry key press
Press [Enter] then use keypad to
key in an exact value.
Press [Enter] then use keypad to
key in an exact value.
Press [Enter] then use keypad to
key in an exact value.
Press [Enter] then use keypad to
key in an exact value.
Use ▲ or ▼ to navigate between
YES | NO. Press [Enter] to save.
-
Use ▲ or ▼ to navigate between
YES | NO. Press [Enter] to save.
Press [Enter] to execute.
Use ▲ or ▼ to navigate between
ON | OFF. Press [Enter] to save.
Use ▲ or ▼ to navigate between
BUS | IMM | TTLT | EXT. Press
[Enter] to save.
Use keypad to key in an exact
value, alternatively use ▲ to
increment or ▼ to decrement.
Press [Enter] to save.
Description
Configure Subnet address only
when DHCP is OFF.
Configure Gateway address only
when DHCP is OFF.
Configure DNS 1 address only
when AUTO DNS is OFF.
Configure DNS 2 address only
when AUTO DNS is OFF.
Update the configuration.
Phase select function is not
available. Key press has no effect
on ac source.
Reset the LAN configuration to
factory default conditions.
Initiate trigger immediately.
Initiate trigger continuously.
Select transient trigger source.
Set trigger delay in seconds.
29
Advertisement
