Wali TVF001XL Installation Manual

INSTALLATION MANUAL
TABLETOP TV STAND
TVF001XL
Supplied Parts List
Base Pole
A (x1) B (x1)
Washer Step Washer
M (x3) N (x3)
1
Tear off the protective paper to attach Anti-Skid Pad
H
A
100x100\100x200\200x100
200x200\300x200\300x300
400x200\400x300\400x400
VESA Plate Adapter Plate
C (x1) D (x4) E (x1)
Wrench M5x14 Bolt M6x14 Bolt
O (x1) M-A (x4) M-B (x4)
H to the bottom designated position of Base A as image shown.
WARNING
！
www.walielectric.com
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may
support@walielectric.com
cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual.
Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect
assembly or inappropriate use.
1-844-SATTLER (18447288537)
TIPOVER WARNING
！
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
RATED
40kg/88lbs
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIP OVER.
SMALL PARTS- NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
Pole Cover Wire Clip
F (x1) G (x2)
M6x30 Bolt M8x30 Bolt
M-C (x4) M-D (x4)
2
Connect Pole
(Screwdriver not included)
B
Anti-Skid Pad M6x12 Bolt M6x25 Bolt
H (x4) I (x4)
M8x50 Bolt D5 Washer D8 Washer
M-E (x4) M-F (x4)
B , Plate E and Base A from the bottom using M6x25 Bolt
E
M6x50 Bolt Nut
J (x3) K (x1) L (x4)
Spacer Spacer
M-G (x4) M-H (x8) M-I (x8)
J , Washer M and Step Washer N , tighten with a screwdriver.
A
N
M
J