Related Manuals for Wali MATI001-G
Summary of Contents for Wali MATI001-G
- Page 1 Single Monitor Desk Mount MATI001-G 32" 75x75/100x100 2~9.9kg MATI001-W ( 4.4~22lbs) RATED support@walielectric.com...
- Page 3 Supplied Parts List VESA Plate C-Clamp A (x1) B (x1) C (x1) D (x1) C-Clamp Brace Base Plate Bottom Grommet Plate E (x1) F (x1) G (x1) H (x1) Bolt M6x12 Bolt Spring Washer I (x1) J (x3) K (x1) L (x1) Anti-skid Pad Allen Key 4mm...
- Page 4 Step 2 Option A Clamp Installation 1. Connect the C-Clamp Brace to the Base using 3 pcs M6X12 Bolt and tighten with Allen Key 4mm . Tear off the protective paper to attach Anti-Skid Pad to the bottom designated position of Base as the image shown. 2.
- Page 5 3. Rotate the knob clockwise to fasten for stability. Step 2 Option B Grommet Base Installation 1. Attach the Plate to the Base from the bottom using 3 pcs M6X12 Bolt and tighten with Allen Key 4mm Tear off the protective paper to attach Anti-Skid Pad to the bottom designated position of Base as the image shown.
- Page 6 2a. Existing Grommet Hole Installation 2b. Self-drilled Grommet Hole Installation If the existing grommet hole comes with a plastic Mark the position of the hole on your mounting surface. protector, remove it to ensure a flat surface before Drill a 3/8"(10mm) diameter hole at the marked position installing the desk mount.
- Page 7 Step 3 Connect the Arm to the Base and tighten with Allen Key 4mm Connect the Arm to the Arm and tighten with Allen Key 4mm...
- Page 8 Step 4 Step 4.1 M4x12 M5x12 Hand thread screws into the threaded inserts on the back of your TV to determine which screw diameter (M4) or (M5) to use. Step 4.2 Select M4x12 Bolt or M5x12 Bolt according to your TV/Monitor, connect VESA Plate together with D5 Washer into the mounting holes on the back of TV/Monitor, tighten with screwdriver.
- Page 9 Step 6 To properly balance the arm with monitors mounted, adjust the spring tension with Allen Key 5mm First, position and firmly hold the arm horizontally as shown. Ask for assistance should you require it. For heavier monitors, turn the adjustment screw clockwise until it stays in a horizontal position.
- Page 10 Step 7 Pull the bottom cable slot cover to detach it off the arm. Guide the cable through the cable slot and slide the cover back to arm. Step 8 Screw Adjustable to prevent monitor arm from swinging into screens or walls. ±90°...
- Page 11 Step 9 Angle Adjustments Rotate: Manually adjust rotate angle. (Rotate 360°) Note: If the display does not stop at your desired position, tighten the screws as shown. Tilt: Adjust the VESA Plate tilt using Allen Key ( Tilt +40°/-40°) Note: If the display does not stop at your desired position, tighten the screw as shown.
- Page 12 We support the technology that brings your home to life. We offer high quality products, professional customer service, and extensive technical support. If you have any questions,please contact us. 1-844-SATTLER (18447288537) support@walielectric.com www.walielectric.com...