Wali TVF001 Installation Manual

INSTALLATION MANUAL
TABLETOP TV STAND
TVF001
Supplied Parts List
Base Pole
A (x1) B (x1)
Washer Step Washer
J (x3) K (x3)
1
Tear off the protective paper to attach Anti-Skid Pad
G
A
100x100\100x200
200x100\200x200
VESA Plate Pole Cover
C (x1)
M4x14 Bolt M5x14 Bolt
M-A (x4) M-B (x4)
G to the bottom designated position of Base A as image shown.
WARNING
！
www.walielectric.com
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may
support@walielectric.com
cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual.
Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect
assembly or inappropriate use.
1-844-SATTLER (18447288537)
TIPOVER WARNING
！
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
RATED
40kg/88lbs
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIP OVER.
SMALL PARTS- NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
Plate
D (x1) E (x1)
M6x14 Bolt
M-C (x4)
2
Connect Pole
(Screwdriver not included)
B
Wire Clip Anti-Skid Pad
F (x2) G (x4)
M6x30 Bolt D5 Washer
M-D (x4) M-E (x4)
B , Plate E and Base A from the bottom using M6x25 Bolt
E
M6x25 Bolt M6x50 Bolt
H (x3) I (x1)
D8 Washer Spacer
M-F (x4) M-G (x8)
H , Washer J and Step Washer K , tighten with a screwdriver.
A
K
J
H