HP Compaq dc7100 DT Hardware Reference Manual page 50

Battery Replacement
Ä
B-2
CAUTION: Static electricity can damage the electronic components of
the computer or optional equipment. Before beginning these procedures,
ensure that you are discharged of static electricity by briefly touching a
grounded metal object.
1. Use Computer Setup to disable the Smart Cover Sensor, if
necessary. Refer to the Computer Setup (F10) Utility Guide on
the Documentation CD for more information.
2. Remove the drive from the MultiBay. Refer to
Drive from the MultiBay" on page 2–32
3. Turn off the computer properly through the operating system,
then turn off any external devices. Disconnect the power cord
from the power outlet and disconnect any external devices.
4. Remove the computer access panel. Refer to
Replacing the Access Panel" on page 2–1
5. Remove the MultiBay daughter card by pulling it straight up out
of the computer 1.
6. Pull the power supply forward 2, then rotate the right side up 3.
7. Pull the power supply out of the computer.
Removing the Power Supply
www.hp.com
"Removing a
for more information.
"Removing and
for more information.
Hardware Reference Guide