Partitioning And Formatting A Multibay Hard Drive - HP Compaq dc7100 DT Hardware Reference Manual

Hardware Upgrades

Partitioning and Formatting a MultiBay Hard Drive

✎
2–34
If the device does not start, ensure that the necessary device drivers
are installed on the system. If they are not available, they may be
downloaded, at no cost, from the HP Web site at
support & drivers, select Download drivers and software, enter the
model number of the computer, and press
You must be logged on as an administrator or a member of the
Administrators group in order to complete this procedure.
1. Exit all software applications, shut down the operating system
software, and turn off the computer.
2. Insert the MultiBay hard drive into the MultiBay. Refer to
"Inserting a Drive into the MultiBay" on page 2–33
information.
3. Turn on the computer.
4. Click Start.
5. Right-click My Computer, then click Manage.
6. Click Storage, then double-click Disk Management.
7. Right-click the MultiBay hard drive, then click Partition.
Carefully read and respond to any prompts that appear on the
screen.
Refer to the online Help (click Action > Help) for additional
information.
www.hp.com
www.hp.com
. Click
Enter.
for more
Hardware Reference Guide