Hardware Reference Guide
4. Position the computer on its side with the rubber pads on the
bottom. (If the computer is being used in the tower configuration,
remove the computer from the stand. Refer to
Removing the Tower Stand" on page 2–7
5. Remove the access panel. Refer to
Access Panel" on page 2–1
6. Push the tongue of the catch down 1 and slide the catch toward
the right side of the computer 2 until it is disengaged.
Releasing the MultiBay Security Catch
7. Replace the access panel.
8. Replace the stand, if desired.
9. Reconnect all external devices, plug the power cord into the
power outlet, and turn the computer on.
10. Use Computer Setup to enable the Smart Cover Sensor, if desired.
www.hp.com
Hardware Upgrades
"Attaching and
for more information.)
"Removing and Replacing the
for more information.
2–31