HP Compaq dc7100 DT Hardware Reference Manual page 34

Hardware Upgrades
2–22
13. Line up the tabs on the expansion card assembly with the slots on
the computer chassis and press the assembly firmly down into
place.
14. Connect external cables to the installed card, if needed. Connect
internal cables to the system board, if needed.
15. Replace the access panel.
16. Install the optional cable lock, if desired.
17. Replace the stand, if desired.
18. Reconnect all external devices, plug the power cord into the
power outlet, and turn the computer on.
19. Use Computer Setup to enable the Smart Cover Sensor, if desired.
www.hp.com Hardware Reference Guide