Page 1
Please Read the instructions carefully to familiarize yourself with every detail and step involved. Keep this manual for future reference. Find a suitable space to assemble the Everbloom Garden Bed. You need at least 37” x 13” (94 x 33cm) for the finished product. A flat and firm area (like a garage floor or flat yard space) is perfect! The only tool you may need is a rubber mallet.
PARTS LIST Deep Trough Garden Bed on Foot 36” L x 12” W x 21" H Left Corner Right Corner Long Long Support Short Short Bottom Post Post Board Board Board A Board B Board 240mm 240mm 420mm Bottom Bottom 900mm 900mm Post Cap...
Page 3
ASSEMBLY Deep Trough Garden Bed on Foot 36” L x 12” W x 21" H Start by making sure each corner post is oriented correctly. Reference image 1 and ensure that the 8 holes are on the top of the standing corner posts. Slide one short board B into the corner brackets from above. Note: The short boards need to be placed in the inward “U”...
Page 4
ASSEMBLY Deep Trough Garden Bed on Foot 36” L x 12” W x 21" H Slide the long support boards into the corner posts, as shown in Image 3. Right Corner Post Long Support Board Left Corner Post Long Support Board Short Board B...
Page 5
ASSEMBLY Deep Trough Garden Bed on Foot 36” L x 12” W x 21" H Carefully flip over the garden bed so that it lays flat with the long support boards pointing towards the sky. Slide the bottom boards through the slots of the long support boards. Both 2 boards can be slided in now. (image 4) Bottom Board Long Support...
Page 6
ASSEMBLY Deep Trough Garden Bed on Foot 36” L x 12” W x 21" H Slide the remaining corner posts into place as shown in Image 5. Ensure that the direction of the each post is symmetric for the remaining short board. Left Corner Post Right Corner...
Page 7
ASSEMBLY Deep Trough Garden Bed on Foot 36” L x 12” W x 21" H Slide one short board into the corner brackets, as shown in Image 6. Left Corner Post Right Corner Post Long Support Short Board Board B Short Board B Right Corner...
Page 8
ASSEMBLY Deep Trough Garden Bed on Foot 36” L x 12” W x 21" H Flip over the bed so it stands upright. Slide the remaining boards into place, as shown in image 7. Short Board A Long Board Image 7...
Page 9
ASSEMBLY Deep Trough Garden Bed on Foot 36” L x 12” W x 21" H Use the rubber mallet to ensure the boards are tightly in place. Cover the brackets with the 8 end caps, as shown in Image 8. Post Cap Rubber Mallet...
Page 10
ASSEMBLY Deep Trough Garden Bed on Foot 36” L x 12” W x 21" H Unfold the liner and cover the bottom of the garden bed, as shown in Image 9 and Image 10. Garden Bed Liner Image 9 Image 10...
Page 11
Notes Deep Trough Garden Bed on Foot 36” L x 12” W x 21" H Sometimes there might be mis-alignment of corner brackes as showed in Image 11 and Image 12, which may result in difficulty of sliding boards into the brackets. Please adjust them to the right position. ASSEMBLING PROBLEM 1 Image 11 ASSEMBLING PROBLEM 2...
Page 12
Notes Deep Trough Garden Bed on Foot 36” L x 12” W x 21" H Six depths are available by changing the sequence of the boards and position of the bottom boards, as shown in below images. You can choose according to different needs . Depth 1 Depth 2 Long Board...
Page 13
Notes Deep Trough Garden Bed on Foot 36” L x 12” W x 21" H Six depths are available by changing the sequence of the boards and position of the bottom boards, as shown in below images. You can choose according to different needs . Depth 5 Depth 6 Long Support Board...
Page 14
Questions or Comments? Email us at service@everbloom-garden.com Welcome to our website: www.everbloom-garden.com Distributed by: Dynaforge Trading LLC St. Paul, MN55101 Email: service@everbloom-garden.com...
Need help?
Do you have a question about the E213612 and is the answer not in the manual?
Questions and answers