Advertisement
Table of Contents
Two Tiers Raised Garden Bed
3' L x 6' W - 7" H & 14" H
Installation Guide
BEFORE YOU START
Please Read the instructions carefully to familiarize yourself with every detail
and step involved. Keep this manual for future reference. Find a suitable
space to assemble the Everbloom Garden Bed.
You need at least 37-3/4" x 79-1/2" (96 x 160cm) for the finished product. A
flat and firm area (like a garage floor or flat yard space) is perfect! The only
tool you may need is a rubber mallet.
IMPORTANT NOTES
Small parts are included; we advise you to keep them away from children
and pets.
We also suggest having another person help you assemble.
Load capacity: approximately 16 cu. ft. of soil
RBD1233
Advertisement
Table of Contents
Related Manuals for Everbloom Two Tiers Raised Garden Bed
Summary of Contents for Everbloom Two Tiers Raised Garden Bed
- Page 1 Please Read the instructions carefully to familiarize yourself with every detail and step involved. Keep this manual for future reference. Find a suitable space to assemble the Everbloom Garden Bed. You need at least 37-3/4” x 79-1/2” (96 x 160cm) for the finished product. A flat and firm area (like a garage floor or flat yard space) is perfect! The only tool you may need is a rubber mallet.
- Page 2 PARTS LIST 3’ L x 6’ W - 7” H & 14” H Two Tiers Raised Garden Bed Left Corner Right Corner Long Board Left Joiner Right Joiner Post Post X 11 Corner Corner (360mm) X 1 (360mm) X 1...
- Page 3 ASSEMBLY 3’ L x 6’ W - 7” H & 14” H Two Tiers Raised Garden Bed Start by making sure each corner post is oriented correctly. Reference image 1. Slide one long board into the corner posts from above.
- Page 4 ASSEMBLY 3’ L x 6’ W - 7” H & 14” H Two Tiers Raised Garden Bed Slide the other six long boards into the corner posts from above, as shown in image 3. Left Corner Long Board Post (360mm)
- Page 5 ASSEMBLY 3’ L x 6’ W - 7” H & 14” H Two Tiers Raised Garden Bed Slide the remaining four long bards in to for the second layer, as shown in image 4. Long Board Long Board Left Corner...
- Page 6 ASSEMBLY 3’ L x 6’ W - 7” H & 14” H Two Tiers Raised Garden Bed If necessary, use your rubber mallet to ensure the boards are tightly in place. Cover the brackets with the 14 endcaps, as shown in image 5.
- Page 7 ASSEMBLY 3’ L x 6’ W - 7” H & 14” H Two Tiers Raised Garden Bed Unfold the liners and cover the bottom of the garden bed, as shown in Image 6 and Image 7. Note: The liner is water-proof. You can use a needle to puncture the liner if you want water to fall through the bottom boards.
- Page 8 Questions or Comments? Email us at service@everbloom-garden.com Welcome to our website: www.everbloom-garden.com Distributed by: Dynaforge Trading LLC St. Paul, MN55101 Email: service@everbloom-garden.com...
Need help?
Do you have a question about the Two Tiers Raised Garden Bed and is the answer not in the manual?
Questions and answers