Nexcom NISE 4300 User Manual page 59

Chapter 4: BIOS Setup
IT8528 H/W Monitor
This section is used to monitor hardware status such as temperature, fan
speed and voltages.
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Advanced
Pc Health Status
CPU temperature : +100 °c
System temperature : +42 °c
VCORE : +0.84 V
+12V : +11.99 V
+3V : +3.35 V
VDDQ : +1.35 V
+5V : +5.09 V
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
CPU temperature
Detects and displays the current CPU temperature.
System temperature
Detects and displays the current system temperature.
VCORE to +5V
Detects and displays the output voltages.
Copyright © 2019 NEXCOM International Co., Ltd. All Rights Reserved.
Network Stack Configuration
This section is used to configure the network stack settings.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Network Stack
Enables or disables UEFI network stack.
45
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Advanced
Network Stack [Disabled]
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
Enable/Disable UEFI Network
Stack
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
NISE 4300 User Manual