Table of Contents
Advertisement
14 FULL ON
15 STUDIO-RED
16 STUDIO-GREEN
17 STUDIO-BLUE
18 STUDIO-WHITE
19 WHITE CALIBRATION-RED
20 WHITE CALIBRATION GREEN
21 WHITE CALIBRATION-BLUE
22 WHITE CALIBRATION-WHITE
INVERT MAPPING
23
x18 version only
24 CURRENT HOURS
25 POWER CONSUMPTION(AC 220V)
26 MAINTENANCE TIME
27 MAINTENANCE TIME
28 ERROR MESSAGES
29 CLEAN ALL DATA
SPECIAL PIDs** for VW version
1
DMX FAULT
2
MASTER/SLAVE
3
STAND ALONE MODE
4
UNO/DUO MODE
5
EFFECTS
6
EFFECTS SPEED
7
FIXED COLOR
0:HB MODE
1:STUDIO MODE
(000 ÷ 255)
(000 ÷ 255)
(000 ÷ 255)
(000 ÷ 255)
(125 ÷ 255)
(125 ÷ 255)
(125 ÷ 255)
(125 ÷ 255)
0: OFF - 1:ON
(00000-65535)
(ALERT PERIOD:10 ÷ 300)
(ELAPSED TIME:00-ALERT PERIOD)
0:NO
1:YES
0:BLACKOUT
1:HOLD
2:STAND ALONE
0:MST DMX
1:MST NO DMX
2:SLAVE
0:EFFECTS
1:STATIC
2:CCT
3:MAN
0:STATIC
1:CCT
2:MAN
(0 - 5)
(0 - 255)
(0 - 2)
PROLIGHTS - ArcShine M series
High Brightness Mode, delivering the full
output on every primary color
Fixture will reach 6000K white point.
Max value of red color intensity when all color
are at maximum value.
Max value of green color intensity when all
color are at maximum value.
Max value of blue color intensity when all
color are at maximum value.
Max value of white color intensity when all
color are at maximum value.
Max value of red color intensity.
Max value of green color intensity.
Max value of blue color intensity.
Max value of white color intensity.
Rotate Section direction
Shows fixture hours.
Shows fixture's power consumption.
To set maintenance time alert period
Shows elapsed tiime to alert period.
Shows error codes.
Complete reset of the fixture.
To choose the behaviour of fixture in case of
dmx signal lost.
Outputs dmx signal.
Doesn't output dmx signal.
Receive dmx signal.
To use onboard effects
To use static color presets.
To use white presets:
To use RAW color mixing. CW and WW are
available as single custom pid as listed below.
To use static color presets.
To use white presets:
To use RAW color mixing. CW and WW are
available as single custom pid as listed below.
Choose between different effects.
Choose speed of the effects
To choose between static color presets.
0: CW
1: WW
2: CW + WW
17
Advertisement
Table of Contents
