Kenwood NX-1300DE3 User Manual page 56

Speaker Type
Allows you to configure the type of the external speaker and speaker/ microphone
to be connected to the transceiver and enables the optimal conditions of the audio
quality.
Menu Mode:
1 Select "SPK TYPE" and press the [ S ] button.
2 Press the [ <B ] and [ C> ] buttons to select the speaker type.
• You can select from None (without adjusting the audio characteristics),
SPK 1 to SPK 11.
3 Press the [ S ] button to confirm and exit mode.
Type
SPK 1 KMC-45*, KMC-45D
SPK 2 KMC-48GPS*
SPK 3 KMC-21
KHS-7, KHS-7A*, KHS-8BL, KHS-8BE, KHS-9BL, KHS-9BE,
SPK 4 KHS-21*, KHS-22, KHS-22A, KHS-25, KHS-26, KHS-27, KHS-27A,
KHS-31, KHS-31C
SPK 5 KHS-23, KHS-35F
SPK 6 KHS-10-BH*, KHS-10-OH*, KHS-10D-BH, KHS-10D-OH
SPK 7 EMC-11, EMC-12
SPK 8 KHS-1*
SPK 9 KHS-29F
SPK 10 KEP-2
SPK 11 KHS-8NC
* : Not support for DMR.
[NXDN/ DMR]
Model
56