Kenwood NX-1300DE3 User Manual page 35

Group + Status
Allows you to specify a Group ID to send status messages.
1 PF Button:
Press the programmed button to enter Group Call Mode (NXDN/
DMR) or Selcall Mode (FleetSync/ MDC-1200).
Menu Mode:
Mode (NXDN/ DMR) or Selcall Mode (FleetSync/ MDC-1200).
2 Press the [ <B ] and [ C> ] buttons to select a Group ID/ name from the list.
3 Press the [ S ] button to enter Status Mode.
4 Press the [ <B ] and [ C> ] buttons to select the status messages you want to
transmit.
5 Press the PTT switch or Side 2 button to send status messages.
High Transmit Power
Turns High Transmit Power On or Off. When using a channel programmed with low
or medium power, this allows you to change the output power to high.
PF Button:
Press the programmed button to change the output power to high.
• Beep A (1 beep) sounds.
Press this button again to change the transmit power to the original setting.
• Beep B (2 beeps) sounds.
Menu Mode:
Select "HIGH PWR" and press the [ S ] button to change the High Transmit Power
On or Off.
• The " " indicator appears while using Low transmit power.
• The " " indicator disappears while using High or Medium transmit power.
[Analog/ NXDN/ DMR]
Select "GRP STAT" and press the [ S ] button to enter Group Call
[Analog/ NXDN/ DMR]
High or Medium Transmit Power
Low Transmit Power
35