Kenwood NX-1300DE3 User Manual page 26

Call 1 ~ 6 [Analog/ NXDN/ DMR]
Allows you to send assigned signaling from Call 1 to Call 6.
PF Button:
Press the programmed button to send a message or initiate a call.
Calling Alert [Analog]
Allows you to send a calling alert to the other party. Calling alert tones help
identify yourself to party members and inform them that you are calling.
PF Button:
Press the programmed button to send an Alert tone to a receiver.
Call Interruption [DMR]
Allows a transceiver other than the transmitting transceiver to terminate voice
communications by sending a Call Interruption request message. If a transceiver
receives a Call Interruption request message on the channel where the
transceiver is performing voice communications, the transceiver terminates the
voice communications.
PF Button:
Press the programmed button to send Call Interruption Request message.
Call Response [NXDN/ DMR]
Allows you to send an acknowledge call, upon receipt of the acknowledgment
request message from an individual call.
PF Button:
Press the programmed button to respond to an Individual Call.
26