Kenwood NX-1300DE3 User Manual page 47

Radio Check (MDC-1200)
This function is for MDC-1200 Radio Check. Radio Check is a function for
checking whether a transceiver is available for calling, such as whether the
transceiver is on or whether it is within the communication range.
Menu Mode:
1 Select "RD CHK" and press the [ S ] button to enter Radio Check Mode.
2 Press the [ <B ] and [ C> ] buttons to select the destination ID from the ID List.
3 Press the PTT switch to start Radio check.
4 When ACK (Acknowledgement) is received, "COMPLETE" is displayed for 1
second.
Radio Inhibit (MDC-1200)
This function is for MDC-1200 Radio Inhibit. Radio Inhibit is a function for stunning
a transceiver.
Menu Mode:
1 Select "INHIBIT" and press the [ S ] button to enter Radio Inhibit Mode.
2 Press the [ <B ] and [ C> ] buttons to select the destination ID from the ID List.
3 Press the PTT switch to send Radio Inhibit command.
4
When ACK (Acknowledgement) is received, "COMPLETE" is displayed for 1
second.
[Analog]
[Analog]
47