Kenwood NX-1300DE3 User Manual page 30

Direct Channel 1 ~ 5
Allows you to go directly to Direct Channel 1 ~ 5.
PF Button:
Press the programmed button to jump to a frequently used zone and channel.
• Beep A (1 beep) sounds.
Press this button again to return to the formerly selected channel.
• Beep B (2 beeps) sounds.
If activated by your dealer, you can set your own Direct Channels by selecting
your desired zone and channel using Direct Channel 1 ~ 5.
Direct Channel 1 ~ 5 Select
Allows you to set the currently selected channel as the Direct Channel 1 ~ 5.
1
Select the channel to be set as Direct Channel.
2 PF Button: Press and hold the programmed button to set the currently
selected channel as Direct Channel 1 ~ 5.
• Beep C (3 beeps) sounds.
Menu Mode:
the currently selected channel as Direct Channel 1 ~ 5.
[Analog/ NXDN/ DMR]
[Analog/ NXDN/ DMR]
Select "DR 1 SEL" ~ "DR 5 SEL" and press the [ S ] button to set
30