Table of Contents
Advertisement
Send the GPS Data
Allows you to send your positioning data to the base station when a GPS speaker/
microphone has been installed.
•
When the power is turned ON and/or the reception condition of the GPS
satellite is poor, positioning may take longer to complete.
PF Button:
Press the programmed button to send GPS data.
•
Beep A (1 beep) sounds.
Menu Mode:
Select "SEND GPS" and press the [ S ] button to send GPS data.
•
When GPS data transmission is completed and "COMPLETE" is displayed for
1 second.
Short Message
Allows you to send short messages such as an address, telephone number, etc.
1
PF Button:
Press the programmed button to enter Short Message Mode.
Menu Mode:
Message Mode.
2
Press the [ <B ] and [ C> ] buttons to select a Short Message from the list
(NXDN/ DMR).
3
Press the PTT switch or Side 2 button to send short messages.
Speaker Attenuation
Temporarily reduce the volume level of the speaker of the transceiver and
speaker/ microphone.
PF Button:
Press the programmed button to change the Speaker Attenuation On or Off.
[Analog/ NXDN/ DMR]
[NXDN/ DMR]
Select "SDM MODE" and press the [ S ] button to enter Short
[Analog/ NXDN/ DMR]
55
Hide quick links:
Advertisement
Table of Contents
