Kenwood NX-1300DE3 User Manual page 44

Monitor [Analog/ NXDN/ DMR]
Allows you to turn the transceiver signaling off, to listen to all calls that are
received on the channel.
PF Button:
Press the programmed button to change the Monitor On.
• Beep A (1 beep) sounds.
Press this button again to change the Monitor Off.
• Beep B (2 beeps) sounds.
Menu Mode:
Select "MONITOR" and press the [ S ] button to change the Monitor On or Off.
• The " " indicator appears while Monitor is On.
Monitor Momentary
PF Button:
Press and hold the programmed button to momentarily turn the transceiver
signaling off. Releasing this button turns the transceiver signaling back on. While
signaling is off, you can listen to all calls that are received on the channel.
Operator Selectable Tone
Switches the preset QT/DQT Decode/Encode pair to an OST (Operator
Selectable Tone) pair.
PF Button:
Press the programmed button to change the OST On or Off.
Menu Mode:
Select "OST" and press the [ S ] button to change the OST On or Off.
Refer to "Operator Selectable Tone (OST)" {p. 74}.
[Analog/ NXDN/ DMR]
[Analog]
44