Advertisement
2. INSTALLATION INSTRUCTIONS
Important!
The appliance must be installed by a qualified engineer in compliance
with the relevant regulations.
The washing machine is heavy. Take care when lifting it.
2.1 UNPACKING
The unit on flexible mounts is fixed in place for transport using the screws (A)
on the rear of the washing machine with the relative plastic spacers (B). Once
the screws have been removed, the power supply lead can be used.
1. Undo all the screws with a 10 mm spanner.
2. Remove all the screws (A) from the rear
3. Remove all the plastic spacers (B)
A
4.
Fit all the plastic plugs (C) provided, to pre-
vent water splashes from getting into the appli-
ance, and contact with live parts.
WARNING
Do not turn the appliance upside-down or place it on its sides.
All the transport retainer fittings should be kept in a safe place; they must be
fitted again if the appliance has to be moved around in the future.
A+B
B
EN
C
7
Advertisement
