Advertisement
10 Not all fabric condi-
tioner
used or
much
water left in
compartment
11 Appliance
does
spin
12 Emptying water from
drum
13 Laundry not properly
spun
14 Traces of detergent on
laundry
15 Washing results un-
satisfactory
ERROR DISPLAY
In case of a malfunction, the appliance will identify the problem by showing an error code on
the display.
Error code
For all the other error codes displayed, cut off the electricity supply, turn off the water tap and
contact your nearest Service Centre.
-
end of drain hose still correctly positioned.
Check that detergent drawer siphons are correctly fitted and
too
not fouled.
not
Anti-imbalance safety device tripped because laundry not
evenly distributed in drum. If laundry is still wet at end of cy-
cle, rearrange it in the drum by hand and repeat spin pro-
gramme only.
In the event of a power blackout or appliance failure, the wa-
ter can be removed from the drum using the emergency
procedure.
Large items screwed up and not evenly distributed within
drum. Always wash a mix of large and small items.
Many phosphate-free detergents contain substances with
low water solubility.
Select Rinse programme or brush the laundry.
-
Probably too little detergent or unsuitable detergent
used
-
Difficult stains not dealt with before washing
-
Correct temperature not set
-
Basket overloaded.
Door not properly closed. Try reclosing.
Aqua stop device tripped. Cut off power supply, turn off water tap and
contact nearest service centre.
Water not taken in for washing. See point 2 in troubleshooting table.
Water not pumped out. See point 4 in troubleshooting table.
Key to problem
EN
24
Advertisement
