Advertisement
4.7 LIQUID DETERGENT DOSES
1.
Pour the dose required into the measuring cap supplied with the bottle of liquid deter-
gent and place it in the drum, or use the main wash compartment of the detergent drawer,
fitting the insert provided.
2.
The scale on the red insert is intended as an aid when deciding the dose of liquid de-
tergent.
WARNING
Liquid detergents can be used, at the doses recommended by the producer, only for the
main wash, i.e. in all programmes without prewash.
4.8 DESCALERS
Descalers can be added to the prewash and main wash compartments as recommended by
their producers.Place the detergent in the compartments first, followed by the descaler.
4.9 PROGRAMMES AND FUNCTIONS
For advice on selecting programmes in relation to the type of fabric, refer to the "Pro-
grammes Table", supplied with this manual.
4.10 SWITCHING ON THE APPLIANCE AND SELECTING THE WASHING PROGRAMME
To switch on the appliance and select the programme, proceed as follows:
1.
Turn the programmes knob in either direction. This switches on the washing machine.
2.
Select the washing programme. The time left to the end of the programme and the
maximum recommended weight for the selected programme alternate on the display. The
symbols on the display light up to identify the information shown.
3.
The default spin speed values are shown. The initial settings can be modified using the
button underneath the sequence of spin speeds. And temperatures
4.
If spin speed
the tank full. If this value is set the appliance does not perform the final spin and the
washing programme ends with water in the tank.
Spin Speed selection
Temperatures selection
is set, there will be no spin cycle and the appliance will stop with
EN
Time to end
Max
recommended
weight
15
Advertisement
