Advertisement
4.13 STARTING THE WASHING PROGRAMME
1. To start the washing programme after making your personal settings, press the Start
Pause button.
2. Once the cycle has started, the display shows the time remaining before the end of
the cycle and the Start Pause symbol on the display is constantly on.
3. During performance of the washing programme, the symbols which identify the vari-
ous phases light up:
Cycle phase symbols: Prewash, wash, rinse and final spin.
4.14 INTERRUPTING OR CHANGING THE WASHING PROGRAMME
The washing programme in progress can be interrupted at any moment:
1. Press the "Start/Pause" button for about 3 seconds: the display shows the word PAUS
(for 1 second) alternating with the time remaining until the end of the cycle (for 1 sec-
ond). The Start/Pause light flashes on and off.
Programmes can also be interrupted by turning the programme/temperature setting
knob while the cycle is in progress.
2. To change the washing programme, simply turn the programme knob to select the
new programme; there is no need to set the appliance in pause status. The new cycle
will be carried out completely, beginning from the start. If the tank had already been
filled with water during the previous cycle, the water intake phase will be omitted from
the new programme.
3. To restart the cycle, press the Start-Pause button again.
EN
18
Advertisement
