Advertisement
In the event of damage to the supply cord, it must be replaced by the
manufacturer or an authorized technical service centre to avoid any risk.
Important!
This appliance is easy to use.
However, for the best results it is important to read this manual carefully and
follow all the instructions before putting it into operation.
The manual provides the correct instructions for installation, use and mainte-
nance, as well as giving useful advice.
The manufacturer declines all responsibility for injury or damage caused
by failure to comply with the above regulations or deriving from tampering
with even just one part of the appliance and the use of non-original spare
parts.
2. INSTALLATION INSTRUCTIONS
Important!
The appliance must be installed by a qualified engineer in compliance
with the relevant regulations.
The washing machine is heavy. Take care when lifting it.
2.1 UNPACKING
The unit on flexible mounts is fixed in place for transport using the screws (A)
on the rear of the washing machine with the relative plastic spacers (B). Once
the screws have been removed, the power supply lead can be used.
1. Undo all the screws with a 10 mm spanner.
2. Remove all the screws (A) from the rear
3. Remove all the plastic spacers (B)
A+B
EN
L = brown
N = blue
= yellow-green
6
Advertisement
