Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Smeg LBS108F1
Summary of Contents for Smeg LBS108F1
-
Page 1: Washing Machine
Washing Machine Lavatrice LBS128F1 LBS108F1... -
Page 2: Important Safety Instructions
1 Important safety instructions This section contains safety instructions that will help protect from risk of personal injury or property damage. Failure to follow these instructions shall void any warranty. General safety • This product should not be used by persons with physical, sensory or mental disorders or unlearned or inexperienced people (including children) unless they are attended by a person who will be responsible for their safety or who... -
Page 3: Removing Packaging Reinforcement
• Total weight of the washing machine and the dryer -with full load- when they are placed on top of each other reaches to approx. 180 kilograms. Place the product on a solid and flat floor that has sufficient load carrying capacity! • Do not place the product on the power cable. • Do not install the product at places where temperature may fall below 0ºC. • Place the product at least 1 cm away from the edges of other furniture. Removing packaging reinforcement Tilt the machine backwards to remove the packaging reinforcement. Remove the packaging reinforcement by pulling the ribbon. -
Page 4: Adjusting The Feet
• To prevent flowing of dirty water back into the machine and to allow for easy discharge, do not immerse the hose end into the dirty water or drive it in the drain more than 15 cm. If it is too long, cut it short. • The end of the hose should not be bent, it should not be stepped on and the hose must not be pinched between the drain and the machine. • If the length of the hose is too short, use it by adding an original extension hose. Length of the hose may not be longer than 3.2 m. To avoid water leak failures, the connection between the extension hose and the drain hose of the product must be fitted well with an appropriate clamp as not to come off and leak. -
Page 5: Transportation Of The Product
Packaging materials of the product are manufactured from recyclable materials. Dispose of them properly and sort in accordance with recycled waste instructions. Do not dispose of them with normal domestic waste. Transportation of the product Unplug the product before transporting it. Remove water drain and water supply connections. Drain the remaining water in the product completely; see, "Draining remaining water and cleaning the pump filter". Install transportation safety bolts in the reverse order of removal procedure; see, "Removing the transportation locks". -
Page 6: Using Detergent And Softener
Using detergent and softener Detergent Drawer The detergent drawer is composed of three compartments: - (I) for prewash - (II) for main wash – (III) for softener – (*) in addition, there is siphon piece in the softener compartment. The detergent dispenser may be in two different types according to the model of your machine as seen above. Detergent, softener and other cleaning agents • Add detergent and softener before starting the washing programme. • Never open the detergent drawer while the washing programme is running! • When using a programme without prewash, do not put any detergent into the prewash... - Page 7 laundry, close to the lower part of the drum in future washings. Use the tablet or gel detergent without selecting the prewash function. Using starch • Add liquid starch, powder starch or the dyestuff into the softener compartment as instructed on the package. • Do not use softener and starch together in a washing cycle. • Wipe the inside of the machine with a damp and clean cloth after using starch. Using bleaches • Select a programme with prewash and add the bleaching agent at the beginning of...
-
Page 8: Tips For Efficient Washing
Tips for efficient washing Light colours and whites (Recommended temperature range based on soiling level: 40-90C) It may be necessary to pre-treat the stains of perform prewash. Powder and liquid detergents recommended Heavily Soiled for whites can be used at dosages (difficult stains recommended for such as grass, heavily soiled clothes. coffee, fruits and It is recommended to blood.) use powder detergents... -
Page 9: Operating The Product
4 Operating the product Control panel 1 - Spin Speed Adjustment button 2 - Display 3 - Temperature Adjustment button 4 - Programme Selection knob Display symbols - Spin Speed indicator - Temperature indicator - Spin symbol - Temperature symbol - Remaining Time and Delayed Start indicator - Programme Indicator symbols (Prewash / Main Wash / Rinse / Softener / Spin) - Economy symbol - Delayed Start symbol - Door Locked symbol - Start symbol - Pause symbol - Auxiliary Function symbols... -
Page 10: Main Programmes
Always select the lowest required temperature. Higher temperature means higher power consumption. For further programme details, see "Programme and consumption table". Main programmes Depending on the type of fabric, use the following main programmes. • Cotone (Cottons) Use this programme for your cotton laundry (such as bed sheets, duvet and pillowcase sets, towels, bathrobes, underwear, etc.). Your laundry will be washed with vigorous washing action for a longer washing cycle. • Sintetici (Synthetics) Use this programme to wash your synthetic clothes (shirts, blouses, synthetic/cotton blends, etc.). It washes with a gentle action and has a shorter washing cycle compared to the Cottons programme. -
Page 11: Temperature Selection
Before selecting this programme, select the desired spin speed and press Start / Pause / Cancel button. The machine will spin the laundry with the set spin speed and drain the water coming out of them. If you wish to drain only the water without spinning your laundry, select the Pump+Spin programme and then select the No Spin function with the help of Spin Speed Adjustment button. Press Start / Pause / Cancel button. Use a lower spin speed for delicate laundries. Temperature selection Whenever a new programme is selected, the maximum temperature for the selected programme appears on the temperature indicator. -
Page 12: Programme And Consumption Table
Programme and consumption table Programme (°C) Cotone Cotone Cotone Antiallergico Cotone Eco 60** Cotone Eco 60** Cotone Eco 40** Cotone Eco Sintetici Sintetici Lavaggio a freddo Quotidiano Eco 40 Mix 40 İntensivo Rapido Rapido Rapido Delicati Lana Lavaggio a mano Tende • : Selectable * : Automatically selected, no canceling. ** : Energy Label programme (EN 60456 Ed.3) *** : If maximum spin speed of the machine is lower then this value, you can only select up to the maximum spin speed. - : See the programme description for maximum load. -
Page 13: Auxiliary Function Selection
Auxiliary function selection Select the desired auxiliary functions before starting the programme. Furthermore, you may also select or cancel auxiliary functions that are suitable to the running programme by pressing the Start / Pause / Cancel button when the machine is operating. For this, the machine must be in a step before the auxiliary function you are going to select or cancel. Depending on the programme, press a, b, c or d buttons to select the desired auxiliary function. Symbol of the selected auxiliary function appears on the display. Some functions cannot be selected together. If a second auxiliary function conflicting with the first one is selected before starting the machine, the function selected first will be canceled and the second auxiliary function selection will remain active. -
Page 14: Changing The Selections After Programme Has Started
Canceling the Delayed Start function If you want to cancel the delayed start countdown and start the programme immediately: Press Start / Pause / Cancel button. “:” sign in the middle of the delayed start time on the display stops flashing. Start symbol disappears. Pause symbol and Delayed Start symbol flashes. Decrease the delayed start time by pressing the Delayed Start - button. Programme duration appears after 30 minutes. Press Start / Pause / Cancel button to start the programme. Starting the programme Press Start / Pause / Cancel button to start the programme. Start symbol showing the startup of the programme will turn on. Loading door is locked and Door Locked symbol appears on the display. The symbol of the step from which the programme has started appears on the display (Prewash, Main Wash, Rinse, Softener and Spin). -
Page 15: Maintenance And Cleaning
door opening, then turn the Programme Selection knob to Pump+Spin programme and discharge the water in the machine. Machine is in Rinse Hold mode Spin symbol flashes and Pause symbol illuminates when the machine is in Rinse Hold mode. If you want to spin your laundry when the machine is in this mode: Adjust the spin speed and press Start / Pause / Cancel button. Pause symbol disappears and Start symbol appears. Programme resumes, discharges the water and spins the laundry. If you only want to drain the water without spinning: Just press Start / Pause / Cancel button. Pause symbol disappears. Start symbol appears. -
Page 16: Draining Remaining Water And Cleaning The Pump Filter
nuts by hand. Draining remaining water and cleaning the pump filter The filter system in your machine prevents solid items such as buttons, coins and fabric fibers clogging the pump impeller during discharge of washing water. Thus, the water will be discharged without any problem and the service life of the pump will extend. If the machine fails to drain water, the pump filter is clogged. Filter must be cleaned whenever it is clogged or in every 3 months. Water must be drained off first to clean the pump filter. In addition, prior to transporting the machine (eg., when moving to another house) and in case of freezing of the water, water may have to be drained... -
Page 17: Technical Specifications
This appliance’s packaging material is recyclable. Help recycle it and protect the environment by dropping it off in the municipal receptacles provided for this purpose. Your appliance also contains a great amount of recyclable material. It is marked with this label to indicate the used appliances that should not be mixed with other waste. This way, the appliance recycling organised by your manufacturer will be done under the best possible conditions, in compliance with European Directive 2002/96/EC on Waste Electrical and Electronic Equipment. Contact your town hall or your retailer for the used appliance collection points closest to your home. We thank you doing your part to protect the environment. LBS128F1 230 V / 50Hz 230 V / 50Hz 2200 1200 1.40 0.20 LBS108F1 2200 1000 1.40 0.20... -
Page 18: Troubleshooting
7 Troubleshooting Programme cannot be started or selected. • Washing machine has switched to self protection mode due to a supply problem (line voltage, water pressure, etc.). >>> Press and hold Start / Pause button for 3 seconds to reset the machine to factory settings. (See "Canceling the programme") Water in the machine. • Some water might have remained in the product due to the quality control processes in the production. >>> This is not a failure; water is not harmful to the machine. Machine vibrates or makes noise. -
Page 19: Ricerca E Risoluzione Dei Problemi
7 Ricerca e risoluzione dei problemi Impossibile avviare o selezionare il programma. • La lavatrice potrebbe essere in modalità protezione automatica a causa di problemi alla fornitura (tensione della griglia, pressione dell'acqua, ecc.) >>> Tenere premuto il tasto avvio / pausa per 3 secondi per riportare la lavatrice alle impostazioni di fabbrica. (Vedere "Annullamento del programma") Acqua nella lavatrice. • Potrebbe restare dell'acqua nel prodotto in seguito ai processi di controllo della qualità durante la produzione. >>> Questo non è un guasto; l'acqua non è pericolosa per la lavatrice. La lavatrice vibra o fa rumore.