Advertisement
4.15 PROGRAMME END
Washing programmes are completed automatically. The word END appears on the display
and the "Time remaining" light goes out.
1. Switch the appliance off by turning the programmes knob to OFF
2. Unload the laundry from the drum.
3. Leave the door ajar to allow the interior of the washing machine to dry out.
4. Turn off the water intake tap.
If during the initial spin speed setting stage, the "no spin" mode with stop with tank full
(spin speed set as 0) was selected, at the end of the washing programme the word STOP
appears on the display, alternating with ---- (spin speed of 0) and the spin light is on.
To proceed with the pump-out and spin, press the spin selection button twice. The appliance
restarts the cycle with the pump-out and spin. To select the spin speed required, press the
button until the chosen speed is displayed. To pump out the water from the tank without per-
forming the spin, press the spin selection button until the display indicates speed of 0: the
pump-out will be run without spin.
4.16 CHILD LOCK
1. When this function is activated, the modification of options, temperatures, spin speed
and the washing/drying cycle is not possible while the cycle is in progress.
2. To activate the Child Lock, press and hold the Options button Confirm (1) until the
symbol starts to flash Protecting Children on the display within 3 seconds press the
Child Lock (2).
3. The Child Safety Function symbol lights up to show that the function has been acti-
vated.
4. Repeat the same procedure to deactivate the function.
1
2
EN
Child Lock
Symbol
19
Advertisement
