Advertisement
4.12 TIME TO END
Option selection
1. To select options "time to end",press the "Option selection" button, pressing repeated-
ly the "Confirm option" button options you can select when the wash cycle ends.. The
time to end of cycle function calculates the initial duration of the washing/drying cycle,
the settings made (temperature, spin speed and options) which may shorten or
lengthen the cycle's initial duration, and the delay time the user wishes to add before
the cycle starts.
2. After the time to end has been set, the symbol on the display remains on.
3. To clear the "time to end" function, you must select the option by pressing the button
by "option selection" and press the "Confirm option" button until the display shows 0..
4. The Start Pause symbol flashes on and off until the cycle starts. After the cycle starts,
the symbol remains constantly lit.
Option Time to end
Confirm option
EN
Time to end
symbol
Start pause
symbol
Start Pause
17
Advertisement
