Table of Contents
Advertisement
HP Procurve Switch XL Modules
Features
Link and Mode LEDs
(one pair per port)
2
Features
network ports
Example: The HP Procurve 24-Port 10/100-TX XL Module
The HP Procurve Switch XL Modules have the following features:
auto-enabled ports—the ports are all configured to be ready for network
■
operation as soon as a viable network cable is connected
■
auto-configuration—a default configuration is applied to the module
when the switch is powered on and the module passes self test; this default
configuration works well for most network installations
LEDs that provide information for each port on the link status, network
■
activity, connection bandwidth (speed), communication mode (half or full
duplex), and presence of specific network error packets on the port
■
"hot swap modules" operation—you can add a module or replace a
module without having to shut down the switch (changing the module
type in a given slot does require a switch reset)
"hot swap mini-GBICs" operation—you can add, replace, or change the
■
type of any of the mini-GBICs that you use in the mini-GBIC XL Module,
without having to first remove the module, and without having to shut
down the switch
retaining screw
Advertisement
Table of Contents
