Troubleshooting; Switch And Module Led Error Indicators; Diagnostic Tips - HP ProCurve J4852A Install Manual

HP Procurve Switch XL Modules

Troubleshooting

16
Troubleshooting
One of the primary tools for troubleshooting the switch modules are the LEDs
on the front of the switch and on the modules. Refer to "LED Behavior" on
page 8 for a description of the normal LED behavior. Also, refer to the switch
Installation and Getting Started Guide for more detailed troubleshooting
information for the switch.
The following tables describe switch and module LED displays that indicate
that the module or connections to the ports on the module are not operating
correctly.

Switch and Module LED Error Indicators:

Fault Self Test
†
Flashing Flashing
†
Flashing Flashing
Off Off
†
Flashing Flashing
Off Off
Off Off
†
The flashing behavior is an on/off cycle once every 1.6 seconds, approximately.
††
The fast flashing behavior is an on/off cycle once every 0.8 seconds, approximately.

Diagnostic Tips:

See the tables on the next three pages to diagnose the LED error indicators in
the previous table.
Module Status
† †
Flashing
† †
Flashing On briefly, then
†
Flashing
† †
Flashing
Off Fast Flashing
On Off with cable
connected
Port Link Diagnostic Tips
➊
Never On
➋
Off
➌
Off
† ➍
Flashing
†† ➎
➏