Table of Contents
Advertisement
To fix the HDMI cable
Fix the cable to the cable tie holder at the bottom of the projector, using a commercially
available cable tie, as in the illustration.
Use a cable tie of less than 1.9 mm × 3.8 mm in thickness.
Cable tie
(commercially available)
Connecting an External Monitor
OUTPUT
Projected images can be output to display equipment such as a monitor.
Display equipment
Note
This terminal outputs the image. Output as a computer signal input from the RGB input terminal
(INPUT A, INPUT B) or a video signal input from the YP
Connecting to HDBaseT™ equipment
• You can connect HDBaseT equipment by attaching the Digital Interface Adaptor BKM-PJ10
(not supplied).
• When the Digital Interface Adaptor BKM-PJ10 (not supplied) is attached to the main unit,
image transmission to the main unit, LAN communication, and RS-232C control are enabled
with the commercially available HDBaseT transmitter. Not compatible with voice
communication and power connection.
Mini D-sub 15-pin cable
RGB input
(not supplied)
terminal
Bottom of the projector
Cable tie holder
P
input terminal (INPUT A).
B
R
Connecting the Projector
11
Advertisement
Table of Contents
