Table of Contents
Advertisement
Setting items
Description
Installation Attitude Link to Image Flip/Right Side Up/Upside Down/Front Down/Front Up/
Portrait 1/Portrait 2: Change the cooling setting to suit to the installation
attitude. When set to "Link to Image Flip," the cooling setting changes
based on the setting of "Image Flip."
may affect component reliability.
High Altitude Mode On/Off: Set to "On" when using the projector at an altitude of 1,500 m or
higher. Continuing to use the wrong setting may affect component
reliability.
Screen Aspect
16:10/16:9/4:3: For switching the display area to suit to the screen.
*9
Panel Alignment
This feature allows you to adjust the gaps in the color of characters or the
picture.
When set to "On," "Adjust Color" and "Pattern Color" can be assigned and
adjusted.
Adjust Item: Selects how to make adjustments from below.
Adjust Color: Assigns the desired color to adjust the gaps in color. Select
"R" (Red) or "B" (Blue) to make adjustments based on "G" (Green).
Pattern Color: Select "R/G" (Red and Green) or "R/G/B" (White, all
colors) when "Adjust Color" is "R" (Red). Select "B/G" (Blue and Green)
or "R/G/B" (White, all colors) when the "Adjust Color" is "B" (Blue).
Adjust: The shift adjustment and zone adjustment of the color selected in
"Adjust Color" can be made with V/v/B/b keys.
Reset: The panel alignment settings are initialized to their factory preset
values.
Right Side Up
Upside Down
Horizontal installation
8
Portrait 1*
(The
Portrait 2*
buttons of the
buttons of the
unit face up)
unit face down)
Portrait installation
Shift: Shifts the whole picture and makes adjustments.
Zone: Selects the desired range and makes adjustments.
*7
Continuing to use the wrong setting
Front Down
(Projects
downward)
Vertical installation
8
(The
The Installation Menu
Front Up
(Projects
upward)
33
Advertisement
Table of Contents
