Connecting To An External Monitor - Sony VPL-FHZ131L Operating Instructions Manual

INPUT D
This terminal is used when connecting the projector to a video device with a HDMI output terminal.
Video device
Notes
 Use an HDMI cable with the HDMI logo.
 The HDMI terminal of this projector is not compatible with DSD (Direct Stream Digital) signal or CEC (Consumer Electronics
Control) signal.
To fix the HDMI cable
As shown in the following figure, fix the HDMI cable to the screw hole above the terminal using a
commercially available-cable bracket.
Screw hole

Connecting to an External Monitor

OUTPUT
This terminal outputs projected images. The images are output when a computer signal is input from the
RGB input terminal (INPUT A, INPUT B) or a video signal is input from the YP
Display device
HDMI output
terminal
HDMI cable
(not supplied)
Cable bracket (not supplied)
Mini D-sub 15-
RGB input
pin cable
terminal
(not supplied)
10
INPUT D
P input terminal (INPUT A).
B R