Change Avb Output Stream Size And Format - RME Audio M-32 DA Pro User Manual

10.4.1. Change AVB Output Stream Size and Format

Each of the eight outgoing AVB streams can have a size of 1-8, 12 or 16 channels in AM824 and AAF
stream formats, or 0 channels in CRF Media Clock stream format.
To change the amount of channels and its format in the outgoing AVB stream on the device:
1. Open one of the eight AVB tabs in the OUTPUT section.
2. Move the cursor to highlight the current AVB stream size and press the encoder.
3. Rotate the encoder to configure a new stream size and stream format and confirm by pressing the
encoder again.
To change the amount of channels of the outgoing AVB streams:
1. Connect the device by USB or network cable and open the web remote.
2. Open one of the outgoing AVB Ports.
3. Select the configuration  within the AVB output port to open the outgoing stream settings.
4. Adjust output streams as necessary and click OK .

Changing a stream size briefly interrupts all outgoing AVB streams.
RME M-32 DA Pro User's Guide
10.4. AVB Output Streams | 48